Wall-Mounted Zone Controllers

Description

The remote device shall provide rotary switch source selection for the ZonePro 1260 and 1261. The remote shall have DIP switch identification and connection to the device being controlled shall be via CAT 5 cable and RJ-45 connectors. The device shall be a ZC-9 remote control.

WIRING: Maximum Cable Length depends on number of Zone Controllers and wiring schematic.
SERIES WIRING: Maximum Cable Length varies with number of Zone Controllers. For ExampleThree Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
WIRING: Maximum Cable Length depends on number of Zone Controllers and wiring schematic.
PARALLEL WIRING Using a ZC-BOB: Up to Six Zone Controllers: 1000 ft.
PARALLEL WIRING Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
SAFETY AGENCY CERTIFICATIONS: UL 60065 IEC 60065 EN 55013 E60065