Wall-Mounted Zone Controllers 2 x RJ45 Connectors.

Description

The remote device shall provide programmable push-to-talk page assignment for the dbx? ZonePro™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-7 remote controller.

WIRING: Maximum Cable Length depends on number of Zone Controllers and wiring schematic.
SERIES WIRING: Maximum Cable Length varies with number of Zone Controllers. For ExampleThree Zone Controllers: 600 ft. Six Zone Controllers: 300 ft.
WIRING: Maximum Cable Length depends on number of Zone Controllers and wiring schematic.
PARALLEL WIRING Using a ZC-BOB: Up to Six Zone Controllers: 1000 ft.
PARALLEL WIRING Cable: CAT5 or CAT5E with 28.6 Ohm/M (Ohm/1000ft.) nominal DCR and rated VW-1 or higher.
SAFETY AGENCY CERTIFICATIONS: UL 60065 IEC 60065 EN 55013 E60065