Active Wall Plate − 2 x 1 Computer Graphics Video Automatic Switcher

Description

Active Wall Plate − 2×1 Computer Graphics Video Automatic Switcher

The WP−211DS is a high−performance wall plate switcher for computer graphics video signals with resolutions up to and exceeding UXGA and unbalanced stereo audio signals. When configured as a standby switcher it switches to the secondary input upon loss of the primary input.

oHigh Bandwidth – 300MHz (−3dB).
oAutomatic Standby Switching – Switches from the secondary input to the primary input when a signal is detected.
oPower Connect™ System – A single connection to the transmitter or the receiver powers both units. All system units must have the Power Connect system to use this feature.
oFront Panel Connections – 2 15−pin HD (F) and 2 3.5mm mini jacks (F).
oRear Panel Connections – Terminal block outputs for stereo audio contact closure control RGBHV and twisted pair for computer graphics video.
oLooping Input – Input 1.
oControl – Automatic or contact closure switching and output disconnect with LED status indicator.
oID Bit Control.
oSystem Range – CAT 5 up to 100m (320ft).
oTwisted Pair Cable – UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
oDimensions – 16.2cm x 3.98cm x 11.4cm (6.38 x 1.57 x 4.49) US; 15.1cm x 3.98cm x 8.6cm (5.94 x 1.57 x 3.39) EU W D H.
oWall Plate Sizes – 2 gang EU 3 gang US.