20m Premium Single Link DVI-D Male to Male Cable – White

Description

Lindy Super Long Distance DVI cables use a specially developed and optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).

Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.

Features of the RF-BLOK shielded design:

• Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield

• Increased insulation resistance up to 25%

• No soldering requirements as interconnect design needs no 360 degree soldering – eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material – soldering flux

• Tight fit of internal wires as there is no inner mould

• No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible

• Smaller overall dimensions which allows more room behind the host or peripheral

• Increased connector and mating strength – the 4 point reinforcement tabs on the RF-BLOK attached to the connector strengthens the pair as one

• DVI-D Single Link Male to DVI-D Single Link Male
• For use with all modern digital monitors projectors and TFT/LCD Flat Panel Displays
• SXGA (1280 x 1024) and HDTV1080i (1920 x 1080) compatible
• RF-BLOK shielded design
• 10 Year Warranty