mSATA and M.2 SSD to 2.5 inch SATA Drive

Description

This adapter converts an mSATA or M.2 SSD to a 2.5 drive form factor. It supports DevSlp allowing SSD to go into a low power device sleep mode. It is the perfect solution for using mSATA or M.2 SSD in a laptop netbook or other computer's standard 2.5 drive bay.

This adapter has an internal mSATA 52 pin connector and a M.2 B Key slot as well as an external 2.5 SATA 22 pin connector. All within the dimensions of a 2.5 drive with a 9.5mm height.

M.2 was formally called Next Generation Form Factor (NGFF) and it is intended to replace mSATA which uses the PCI Express Mini Card physical layout. The following M.2 formats are supported; type 2280 2260 2242 and 2230. Both Half and Full Size mSATA SSD are supported.

• Converts mSATA and M.2 (NGFF) SSD into a 2.5” drive form factor
• Install smaller SSD hard drives into older machines with SATA interface perfect for upgrading a laptop notebooks or older PCs
• Supports SATA III 6Gbps with DevSlp function
• Adapter is transparent to the OS so does not require any software drivers
• 2 year warranty

Please note – If both M.2 and mSATA SSDs are installed; only the M.2 SSD will be accessible.

Package Contents
• 1x 2.5” aluminium Enclosure
• 1x mSATA and M.2 SSD to 2.5” SATA adapter
• Mounting screws & nuts for mSATA M.2 SSD and housing
• Lindy Manual

Technical Information

• Internal 52 pin mSATA female connector and M.2 B key female connector
• External 22 pin SATA male connector (signals and power)
• Supplied with mounting screws & nuts for SDD and outer case
• Dimensions (WxDxH): 70 x 100 x 9.5mm