2×1 HDMI Plus Bidirectional RS-232 Ethernet & IR over Twisted Pair Switcher/Transmitter

Description

2×1 HDMI Plus Bidirectional RS-232 Ethernet & IR over Twisted Pair Switcher/Transmitter

The TP−582T is a high−quality twisted pair transmitter for HDMI Ethernet 100BaseT bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI inputs and converts it with the Ethernet 100BaseT RS−232 and IR input signals to a twisted pair signal. The TP−582R converts the twisted pair signal back to Ethernet 100BaseT RS−232 IR and two HDMI outputs and de−embeds the audio to S/PDIF and TOSLINK? audio outputs.

oMax. Data Rate – 2.25Gbps.
oHDBaseT Technology.
oHDTV Compatible.
oHDCP Compliance.
oHDMI Support – HDMI (V.1.4 with Deep Color x.v.Color™ Lip Sync HDMI Uncompressed Audio Channels Dolby TrueHD DTS−HD CEC).
o3D Pass-Through.
oEDID PassThru – Passes EDID signals between the source and display.
oBidirectional RS-232 Interface – Commands and data can flow in both directions via the RS−232 interface allowing status requests and control of the destination unit.
oEthernet Interface – Passes 100BaseT.
oSystem Range – Up to 100m (330ft).
oCable – Requires shielded twisted pair (STP) cable. For optimum range and performance use use Kramer's BC−DGKat524 BC−DGKat623 and BC−DGKat7a23 cables. Note that the transmission range depends on the signal resolution graphics card and display used. The distance using non−Kramer CAT 5 CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
oControl – Front panel and contact closure switching.
oIndicators – Status LEDs for input selection output link and power.
oCompact MegaTOOLS? – 2 units can be rack mounted side−by−side in a 1U rack space with the optional RK−T2B universal rack adapter.