Active Mounting Box – Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID for Ackermann Floor Box

Description

Active Mounting Box – Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID for Ackermann Floor Box

The F−121 mounting box for Ackermann floor boxes is a twisted pair transmitter for computer graphics signals up to and exceeding UXGA and unbalanced stereo audio. It converts the input signals into a twisted pair signal that it transmits to a compatible twisted pair receiver.

oHDTV Compatible.
oMax. Resolution – UXGA/1080p.
oEDID Programmable from FC-200.
oPower Connect™ System – A single connection to the transmitter or the receiver powers both units when the devices are within 50m (150ft) of each other.
oSystem Range – Up to 100m (320ft).
oCable – UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5.
oTwisted Pair Connector – 8−pin terminal block.
oModular Expandability – Includes room for two single or one dual Kramer wall plate inserts (covered with blank inserts).
oSize – Suitable for mounting into Ackermann flush floor service units that accept GB2 and GB3 size boxes